The 4mm rod was cut to length and threaded both ends. A piece of 8mm rod threaded 4mm was used to hold one end of the rod while bending.
This jig was made to make the 22 U-bolts required, 20 for the track roll
ers and 2 for the equa
liser beam axle.
The collection of U-bolts, nearly completed.
The U-bolts in place underneath the chassis rail holding the rollers in place.
A very well-written post. I read and liked the post and have also bookmarked you. All the best for future endeavors.
ReplyDeleteU Bolt India
Clamps Suppliers India